Harminox wall-mounted fireplace

Harminox ethanol wall heater

Harminox is inspired by the Harmonie ethanol fireplace. Its entire casing is made from a brushed, curved aluminium plate, and houses a matt black painted hearth. It incorporates a low-energy burner, protected by a grate that completes the look in a ... Harmonious!

Heating capacity: a gain of 7 to 8 degrees!

Harminox is equipped with a 2.2 litre burner consuming just 0.5 l/h. This fireplace is self-sufficient for 4 hours, during which time it will develop the power of 4000 watts.

Installation

A quick inspection of the parcel on receipt will reveal a factory-assembled fireplace. Once the body of the fireplace has been removed, all you have to do is :

• Open the small cardboard box containing the accessories (flame arrestor, etc.) and above all the burner base and its protective grille, which must be secured using the two screws supplied,
• Install the base and fit the burner,
• Start feeding the burner with ethanol for fireplaces (preferably in liquid form).

Once you've done this, you'll need to start installing the wall.

Maintenance is simple: you'll need to remove any marks caused by the heat. As the hearth is painted black, the marks will be almost imperceptible, but can be removed by the more 'maniacal' among you with a cloth soaked in washing-up liquid. For the stainless steel parts of the grate and burner, use a product such as zebracier or any other stainless steel maintenance product.